CU-M Series - C-TL Corporation Limited

MAX BRIGHT » Central Units > CU-M Series

CU-M Series 12V
(Output 12 VDC)

MODEL	LOAD DC	BATTERY	DURATION (Hrs.) _+10%	DIMENSION W x L x H (cm)
CU 15-12- M	70 Watt	12V. 15Ah.	2	37 x 9 x 26
CU 18-12- M	85 Wattt	12V. 18Ah.
CU 21-12- M	100 Watt	12V. 21Ah.
CU 23-12- M	110 Watt	12V. 24Ah.
CU 26-12- M	120 Watt	12V. 26Ah.
CU 35-12- M	160 Watt	12V. 35Ah.		34 x 16.5 x 26
CU 40-12- M	180 Watt	12V. 40Ah.		34 x 16.5 x 26

CU-M Series 24V
(Output 24 VDC)

MODEL	LOAD DC	BATTERY	DURATION (Hrs.) _+10%	DIMENSION W x L x H (cm)
CU 07-24- M	70 Watt	24V. 7.2Ah.	2	37 x 18 x 26
CU 12-24- M	110 Watt	24V. 12Ah.
CU 15-24- M	140 Watt	24V. 15Ah.
CU 18-24- M	200 Watt	24V. 21Ah.
CU 21-24- M	220 Watt	24V. 24Ah.
CU 26-24- M	250 Watt	24V. 26Ah.

Specification
Mode of Operation	: Non - Maintained
Lamp	: Tungsten Halogen or Dichroic Halogen, with 180º adjustable sets andplastic-cover anti-dust
Main Supply	: AC 220 Volt, 50 Hz, 10% Single Phase
Control System	: 8 bit Micro Controller Unit (MCU) with solid state automatic battery charger full function low / high charge and discharge, low / high voltagecut - off preventing battery defects
Construction	: Electro-Galvanized steel sheet 1 mm. with epoxy powder and stove enamel coated anti-rust corrosion proof or ABS Flame Retardant UL 94 V - O
Battery	: Sealed lead acid battery, based o ISO 9001, ISO 14001 certified and UL
Charging Period	: 15-20 Hours as required
Manual Test	: Push Button and Infrared Remote Control as below features :

Function Test	Status	L.E.D.
Normal	5 seconds discharge	- -
Monthly	30 minutes discharge	Red
Half Year	60 minutes discharge
Fail to Test	Flashing

Automatic Test : Real time clock - setting with 8 bit MCU

Function Test	Exercise Status - Selectable
1 Week	30, 60, 90 and 120/180 minutes
2, 4, 6, 8 Weeks
12 Week
24 Week

Safety Features	: Low - High voltage cut-off, preventing battery over discharge and recharge AC fuse - preventing short circuit and overload for main incoming AC 220 Volt DC fuse - preventing short circuit and overload for charging & load
Accessories	: On / Off switch for lamps LED. AC indicates main incoming AC 220 Volt LED. FULL indicates charging, and fully charged LED. FAIL indicates fail to charge LED. AUTO - TEST indicates fully automatic functional LED. IR indicates infrared remote test functional Time Delay 1 up to 10 minutes

Emergency lighting indicators

1. AC                                    : Main incoming AC 220 Volt
2. FULL                               : Charge, and fully charged
3. FAIL                                   : Fail to charge
4. AUTO TEST                    : Fully automatic functional
5. IR                                       : Infrared remote test
                                                     functional
6. BACK TIME (Minutes)    : Record latest duration time
7. IR RECEIVER                  : Infrared receiver signal port
8. 60 minutes Test       : Half year push button
                                                     status
9. 30 minutes Test   : Monthly push button status
10. Fail (TEST SYSTEM) : Fail to test half year and
                                                     monthly status
11. Normal Test                : Test battery 5 seconds
   discharge
12. Monthly Test                 : Test battery 30 minutes
   discharge
13. Half Year Test            : Test battery 60 minutes
   discharge
14. On / Off switch             : Switch on / off for lamps
15. AC FUSE                    : Preventing short circuit and
                                                     overload for main incoming
                                                     AC 220 Volt

ส่งข้อความนี้ให้เพื่อน

พิมพ์

« กลับ