CP-M Series - C-TL Corporation Limited

MAX BRIGHT » Emergency Lights > CP-M Series

CP-M Series
Dichroic Halogen (square)

MODEL	BATTERY	BULBS (Watt)	DURATION (Hrs. Mins) _+10%	WEIGHT (Kgs)	DIMENSION W x L x H (cm)
CP 15-M	12V. 15Ah.	2 x 35 2 x 50	2.00 1.15	8.5	37 x 9 x 33.5
CP 18-M	12V. 18Ah.	2 x 35 2 x 50	2.30 1.40	9.2
CP 21-M	12V. 21Ah.	2 x 35 2 x 50	2.50 2.00	9.9
CP 23-M	12V. 24Ah.	2 x 35 2 x 50	3.00 2.10	10.6
CP 26-M	12V. 26Ah.	2 x 35 2 x 50	3.30 2.30	12.6
CP 35-M	12V. 35Ah.	2 x 35 2 x 50	4.45 3.15	15.0	37 x 16.5 x 33.5
CP 40-M	12V. 40Ah.	2 x 35 2 x 50	5.30 3.50	18.5	37 x 16.5 x 33.5

CP-M Series
Tungsten Halogen Lamp (rectangle)

MODEL	BATTERY	BULBS (Watt)	DURATION (Hrs. Mins) _+10%	WEIGHT (Kgs)	DIMENSION W x L x H (cm)
CP 15-M	12V. 15Ah.	2 x 35 2 x 50	2.00 1.15	8.5	37 x 9 x 33.5
CP 18-M	12V. 18Ah.	2 x 35 2 x 50	2.30 1.40	9.2
CP 21-M	12V. 21Ah.	2 x 35 2 x 50	2.50 2.00	9.9
CP 23-M	12V. 24Ah.	2 x 35 2 x 50	3.00 2.10	10.6
CP 26-M	12V. 26Ah.	2 x 35 2 x 50	3.30 2.30	12.6
CP 35-M	12V. 35Ah.	2 x 35 2 x 50	4.45 3.15	15.0	37 x 16.5 x 33.5
CP 40-M	12V. 40Ah.	2 x 35 2 x 50	5.30 3.50	18.5	37 x 16.5 x 33.5

Specification
Mode of Operation	: Non - Maintained
Lamp	: Tungsten Halogen or Dichroic Halogen, with 180º adjustable sets and plastic-cover anti-dust
Main Supply	: AC 220 Volt, 50 Hz, 10% Single Phase
Control System	: 8 bit Micro Controller Unit (MCU) with solid state automatic battery charger full function low / high charge and discharge, low / high voltagecut - off preventing battery defects
Construction	: Electro-Galvanized steel sheet 1 mm. with epoxy powder and stove enamel coated anti-rust corrosion proof or ABS Flame Retardant UL 94 V - O
Battery	: Sealed lead acid battery, based on ISO 9001, ISO 14001 certified and UL
Charging Period	: 15-20 Hours as required
Manual Test	: Push Button and Infrared Remote Control as below features :

Function Test	Status	L.E.D.
Normal	5 seconds discharge	- -
Monthly	30 minutes discharge	Red
Half Year	60 minutes discharge
Fail to Test	Flashing

Automatic Test : Real time clock - setting with 8 bit
MCU

Function Test	Exercise Status - Selectable
1 Week	30, 60, 90 and 120/180 minutes
2, 4, 6, 8 Weeks
12 Week
24 Week

Safety Features	: Low - High voltage cut-off, preventing battery over discharge and recharge AC fuse - preventing short circuit and overload for main incoming AC 220 Volt DC fuse - preventing short circuit and overload for charging & load
Accessories	: On / Off switch for lamps LED. AC indicates main incoming AC 220 Volt LED. FULL indicates charging, and fully charged LED. FAIL indicates fail to charge LED. AUTO - TEST indicates fully automatic functional LED. IR indicates infrared remote test functional Time Delay 1 up to 10 minutes

Emergency lighting indicators

1. AC                                    : Main incoming AC 220 Volt
2. FULL                               : Charge, and fully charged
3. FAIL                                   : Fail to charge
4. AUTO TEST                    : Fully automatic functional
5. IR                                       : Infrared remote test
                                                     functional
6. BACK TIME (Minutes)    : Record latest duration time
7. IR RECEIVER                  : Infrared receiver signal port
8. 60 minutes Test       : Half year push button status
9. 30 minutes Test   : Monthly push button status
10. Fail (TEST SYSTEM) : Fail to test half year and
                                                     monthly status
11. Normal Test                : Test battery 5 seconds
   discharge
12. Monthly Test                 : Test battery 30 minutes
   discharge
13. Half Year Test            : Test battery 60 minutes
   discharge
14. On / Off switch             : Switch on / off for lamps
15. AC FUSE                    : Preventing short circuit and
                                                     overload for main incoming
                                                     AC 220 Volt

ส่งข้อความนี้ให้เพื่อน

พิมพ์

« กลับ